Ultra Anchors 316 Stainless Steel

Current Stock:
SSUA5-12 to SSUA160-352
Calculated at Checkout


  • Self Launching off your bow roller
  • Always lands in the attack position
  • Instantly buries deep and holds firm in unfavourable weather conditions
  • Does not release in a changing wind or tide
  • Unique self righting features
  • Easily recoverable from the bottom 
  • Self aligning into your bow roller
  • Stunning 316 stainless steel

Manufactured in Europe, the Ultra Anchor range is the pinnacle in anchoring technology and design. Completely hand made from 316 stainless steel and hand polished, every Ultra Anchor is designed for excellence.

The Ultra Anchor demonstrates why a correct weight distribution and design is so important when setting and recovering your anchor. In fact, invert any Ultra Anchor and it will instantly recover itself to the attack position.

Such performance has been achieved with the innovative patented features this anchor displays; including a curved lead filled tip for instant penetration, a hollow shank for optimal weight distribution, concaved base surfaces for maximum holding power and large side wing plates to avoid release during changing wind or tide conditions. Furthermore, each anchor is easily recoverable with the flat pivot surface on the underside base.

The Ultra Anchor is suitable for all vessel types and locates securely onto the bow roller. Standard anchor sizes range from 8kg to 200kg with larger anchors available upon request.

Sourcing Europe’s finest materials and fabricated by specialist engineers, the Ultra Anchor is supplied with a LIFETIME WARRANTY against manufacturing defects under normal conditions and use.

We don’t compromise on quality or design, nor should you – protect your investment in style.


Hollow Shank – Enables weight to be concentrated on anchor tip.

Tubular Construction – Anchor cannot lie on its spine and recovers instantly to the attack position. Anchor will also load correctly into the bow roller.

Lead Filled Tip – Lead is inserted into the anchor tip, achieving the optimal weight distribution and ensuring the anchor will penetrate unfavourable bottom conditions.

Curved Tip – Importantly, the anchor tip is shaped downwards, ensuring an instant set in the sea floor.

Max Holding Power Base – The concaved base/fluke has the appearance of a spade or shovel, and has extreme holding power with a greater surface area than conventional style anchors. The result is a more secure, higher holding power anchor that will not release. 

Side Wing Plates – The Ultra Anchor does not release in a changing wind or tide, it performs a complete 180 degree rotation (while still buried) on its own length and holds firm. The side wing plates assist the anchor to perform this procedure and also act to stabilize the anchor as it penetrates the sea floor.

Flat Underside – Once you begin to recover the anchor from the sea floor, it pivots itself on the flat section and begins to release (boat should be directly over anchor).

Non Chain-Foul Bar – Often chain can foul around the shank of the anchor, resulting in the anchor not able to set. The clever design feature of the non chain-foul bar ensures chain simply cannot wrap around the shank and provides the ability to attach a trip line.

Reinforced Eye – Even under the most extreme load the shanks’ reinforced eye will not bend, break or fail.

Anchor Weight Detail – The anchor weight is stamped into the shank and identifies the anchor size in both kg’s and lbs.

Serial Number – Every Ultra Anchor is stamped with a unique serial number, ensuring your anchor is always identifiable.

The Ultra Anchor suits most bow rollers and is suitable for all vessel types.

Product # Weight
SSUA5-12 5kg - 12lbs 
SSUA8-18 8kg - 18lbs
SSUA12-26 12kg - 26lbs
SSUA16-35  16kg - 35lbs 
SSUA21-46 21kg - 46lbs
SSUA27-60  27kg - 60lbs 
SSUA35-77 35kg - 77lbs 
SSUA45-99  45kg - 99lbs 
SSUA60-132 60kg - 132lbs 
SSUA80-176  80kg - 176lbs 
SSUA100-228 100kg - 228lbs 
SSUA130-286 130kg - 286lbs 
SSUA160-352 160kg - 352lbs


“The Ultra Anchor sets within 1m – and I mean up to the shank! In one of the inlets the wind shifted 180 degrees and the anchor reset itself by turning around on its own length. We spent two days held up in a small inlet in 35 - 45 knot winds. Although my bridle parted; losing my thimble causing our Catamaran to swing wildly, the Ultra Anchor never moved according to the GPS markers. I can finally leave the boat and go on long tours, but most importantly I can sleep at night!”

Steve Dinger – S/V Tivoli 472 Catana Catamaran,July 2007

“The Ultra garnered excellent set ratings at both the long and short scope. Overall the Ultra fell toward the high end in holding power for anchors tested.”

Practical Sailor Magazine – Volume 34, Jan 2008

“The Ultra showed no weak point. On each floor it stopped after a few metres and the tractor could not break it. A very good all rounder, the anchor would win any designer prize – 5 stars.”

Segeln Magazine – Anchor Test Article, Sep 2006

"We replaced our Lloyds approved high holding power anchor which consistently failed to hold our yacht, with the Ultra stainless steel anchor and swivel of the same weight. I am delighted to confirm that the 80kg not only looks superb, but has held my 100 ton yacht securely during 2 days of 40 knot winds with gusts up to 50 knots.”

Peter Burnet – Owner of ‘Spirit of the East’, May 2007