Radial 3 Spd Electric ST Alum Winch Horizontal 24 Volt (60.3STEA24H)

Current Stock:
Calculated at Checkout

Electric Radial winches let you relax in luxury and trim any size sail with the push of a button.

The Radial winch drum’s gripping surface is shaped for each winch size and drum material and features diagonal ribs (rather than textured abrasive materials) to maximize gripping power and greatly reduce line wear. The self-tailing mechanism on the winch means that one crew member can quickly and easily trim or raise sails.

High-strength composite roller bearings and bushings reduce friction under load. Load-carrying gears and pins are 17-4 PH stainless steel for strength, corrosion resistance.

Motors attach to central drive shaft and drive through winch gears for two-speed mechanical advantage. Low-power first gear for fast trimming; higher-power second gear for fine-tuning loaded sheets.

Efficient design allows smaller motor size.

With Dual Function Control Box Included.

Part Number. 60.3STEA24H


Material Aluminum 
Configuration Self-tailing 
Drum Ø (mm) 120 mm
Drum Ø (in) 4 3/4 in
Base Ø (mm) 236 mm
Base Ø (in) 9 5/16 in
Height (mm) 246 mm
Height (in) 9 11/16 in
Weight (kg) 11.7 kg
Weight (lb) 25.8 lb
Weight of Winch and Motor (kg) 22.5 
Weight of Winch and Motor (lb) 49.7 
Motor weight (kg) 10.8 kg
Motor weight (lb) 23.9 lb
Line entry height (mm) 116 mm
Line entry height (in) 4 9/16 in
Minimum line Ø (mm) 8 mm
Minimum line Ø (in) 5/16 in
Maximum line Ø (mm) 16 mm
Maximum line Ø (in) 5/8 in
Fastener circle (mm) 204 mm
Fastener circle (in) 8 in
Fasteners (mm) M8 HH, M8 SH mm
Fasteners (in) 5/16 HH, 5/16 SH in
Number of fasteners 
Gear ratio - 12.2 
Gear ratio - 24.8 
Gear ratio - 314.4 
Power ratio - 19.2 
Power ratio - 220.3 
Power ratio - 361 
Available power Electric horizontal 24V 
Voltage (V) 24 
E (mm) 69 mm
E (in) 2 3/4 in
F (mm) 181 mm
F (in) 7 1/8 in
G (mm) 244 mm
G (in) 9 5/8 in