Power Rib™ drums ensures smooth surface and corrosion-free winch
Built to last
Lightweight stainless steel drum with Power Rib™ ensures a superior grip on the sheet without causing excessive wear
Extended service life of your sheets and halyards
Accommodates a number of sheet and halyard sizes
*Titanium-coated winch available on request
Part number: RA2028000000
Drum Ø D: 70 mm
Base Ø B: 125 mm
Height H: 147 mm
Line Entry L: 65 mm
Line Size: 8-14 mm
Weight: 3.8 kg
Gear ratio: 1st speed 1.3 : 1
Gear ratio: 2nd speed 3.7 : 1
Power ratio: 1st speed 9.5 : 1
Power ratio: 2nd speed 28.6 : 1
Major Effect with Minor Effort
Get a Grip ANDERSEN Winches™ feature the Power Rib™. Unlike other winches with abrasive drum surfaces,Andersen Winch™ drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What’s more, the Power Ribprinciple simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.
It’s all about protecting your investment. With ANDERSEN Winches™, this protection is guaranteed, as the drum maintains its grip year after year. Keeping wear and tear to a minimum also helps maintain resale value, and our 3-year warranty and instant service in more than 30 countries worldwide amount to a benchmark standard.
Low maintenance is a key — and with ANDERSEN Winches™, you can take it for granted. Our winches require less maintenance, since all pawls and springs are captive, and the design of the winch allows you to strip it down for service and greasing.
Power Ratio Power Ratio is the mechanical advantage of the winch and is calculated as follows: length of handle x gear ratio radius of drum
The pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows: pull of handle (kg x Power Ratio = pull of winch (kg).
This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.