Harken ESP Unit 2 Furling System

Harken
$3,319.54
Current Stock:
SKU:
HK7322.10
Shipping:
Calculated at Checkout

The ESP Furler is designed for the cruiser looking for an easy-to assemble furler with an elegant design. Install a Harken® ESP Furler and trim safely from the cockpit when it blows; unfurl instead of motoring when it’s light, for a great day of sailing. 

To make assembly easier, Harken offers top foils in five precut lengths—no hacksaw required. An adjustable bottom foil fine-tunes the unit. Foils slip over most existing headstays without cutting the headstay, reducing set-up time even more. 

Spool is made from Hard Lube-anodized aluminum. Cover, flange, and guard are molded from glass reinforced polymers for high strength. Foils are clearcoat-anodized for durability. The stainless steel sail feeder is strong and durable.

Part Number: HK7322.10

Specifications

Footnote Standard and max headstay lengths determined using 7322.34 2000 top foil. When using long leg kits add 12" (.3 m). 
Wire Ø (1 x 19 SS) (mm) 10, 12 mm
Wire Ø (1 x 19 SS) (in) 3/8, 5/16, 7/16 in
Rod Ø (mm) 7.14, 8.38, 9.53 mm
Rod Ø (dash) -12, -17, -22 
Clevis pin Ø (mm) 15.9, 19.1 mm
Clevis pin Ø (in) 3/4, 5/8 in
Standard headstay length (m) 19.33 m
Standard headstay length (ft in) 63'5" ft in
Maximum headstay length (m) 21.33 m
Maximum headstay length (ft in) 70' ft in
A (mm) 99 mm
A (in) 3 7/8 in
B (mm) 185 mm
B (in) 7 5/16 in
C maximum (mm) 388 m
C maximum (in) 15 5/16 in
D (mm) 51 mm
D (in) 2 in
E maximum with long leg kit (mm) 1335 mm
E maximum with long leg kit (in) 52 9/16 in
E maximum with short leg kit (mm) 1034 mm
E maximum with short leg kit (in) 40 3/4 in
E minimum with long leg kit (mm) 935 mm
E minimum with long leg kit (in) 36 13/16 in
E minimum with short leg kit (mm) 635 mm
E minimum with short leg kit (in) 25 in
F with long leg kit (mm) 629 mm
F with long leg kit (in) 24 3/4 in
F with short leg kit (mm) 329 mm
F with short leg kit (in) 12 15/16 in
G with long leg kit (mm) 600 mm
G with long leg kit (in) 23 5/8 in
G with short leg kit (mm) 300 mm
G with short leg kit (in) 11 13/16 in
H (mm) 250 mm
H (in) 9 7/8 in
I (mm) 97 mm
I (in) 3 5/8 in
J with long leg kit (mm) 425 mm
J with long leg kit (in) 16 3/4 in
J with short leg kit (mm) 125 mm
J with short leg kit (in) 4 15/16 in
K (mm) 53.5 mm
K (in) 2 1/8 in
Extrusion length (m) 2 m
Extrusion length (ft in) 6'6 3/4" ft in
Luff tape size (mm) 5 mm
Luff tape size (in) #6 (6/32) in
 
 

Resources/References:

Harken Instructions

Harken Manual

Need help to design your Harken system - take a look here for the Harken System Guides and Drawings

 
Or perhaps you need some other information (load calculators, block selectors, service instructions or manuals)?   Take a look here for all the official Harken Support Information